How to Remove Transmission Cooler Lines from Radiator Ford with Right Tool

DISCLAIMER: THERE ARE AFFILIATE LINKS IN THIS POST. THIS MEANS THAT AT NO COST TO YOU, I WILL RECEIVE A SMALL COMMISSION IF YOU PURCHASE THROUGH MY LINK.

A transmission cooler line keeps your vehicle’s temperature maintained and stay under control. This is to ensure that there is no burn up incident following to the vehicle’s transmission. There can be numerous reasons behind considering the removal of transmission cooler lines from radiator ford. However, if you don’t follow the right method and use an appropriate tool for this purpose, worse results can end up showing up. It can even destroy the line itself.

So today we will be telling you about a safe method on how to remove transmission cooler lines from radiator ford.

How to Remove Transmission Cooler Lines from Radiator Ford

Let’s cover the entire process by discussing it in several parts. This will allow the folks who have never done things like this before as well. So Here We Go!

Get the Right Tool

Before starting the actual processes of how to remove transmission cooler lines from radiator ford, you want to get some tools that will need. You see, to take out the transmission cooler lines would be simple if you get the right tools to help on removal processes.

For that, buy a good wrench, floor jacks, flat screwdriver, and gloves from the nearest market. These tools will help the following processes to be done accurately and easily. So, grab them as soon as possible. After that, move to the next process.

Wear the Gloves

The next thing you want to do is to wear your bought gloves to stay away from the dirt. If you do all the processes without gloves, it’ll result in your hand with filths.

Also, many experts suggested wearing gloves so that the oil or filth doesn’t disturb you when removing the transmission cooler lines from the radiator ford. So, make sure you have worn the gloves to continue the following steps.

Locate the Transmission Cooler Line in Your Vehicle

Then, you want to look for the transmission cooler lines in your vehicle to locate it. The cooler line actually looks like a small yet flexible nut that should size less than 7/16 inches to 3/4 inches.

Most rear-wheel drive vehicle has their transmission cooler lines under the passenger side area. Yet, if your vehicle is powered to the front wheel, then the transmission cooler lines should be under your vehicle next to the engine block.

Life up Your Vehicle

After that you have found out the transmission cooler lines from the radiator ford, you want to lift up your vehicle. And to do that in the safest way, use your bought floor jacks.

You want to lift your vehicle’s front side by using floor jacks. Make sure you have adjusted it under the frame of your vehicle so that you can remove transmission cooler lines easily.

In the same way, you want to lift your vehicle backside by using a floor jack. When inserting the floor jack, make sure to place it underneath the gaps of the axle.

After lifting your vehicle, you want to make sure there are no tools left for avoiding injury. Then, head to the next process.

Clean the Transmission Fluid

Before removing the transmission cooler lines from the radiator ford, you want to clean the transmission fluid from the bottom side. To do that in the right way, clean the transmission fluid from the pan section.

For Your Information, the pans have a plug to drain the fluid. And to take out the fluid, you want to use your bought wrench and start twisting it. Make sure you are loosening the bolt that is attached to the pan.

After that, use your bought flat screwdriver in the pan and transmission. To break the pan gasket from the transmission, pressure down the surface with the flat screwdriver. Then wait for a while to drain the fluid. Once it is finished draining fluid, remove the pan and head to the next step.

Release Your Vehicle Hood and Locate Transmission Cooler Lines

Afterward, unlock your vehicle hood to check the transmission cooler lines from the radiator. If you are done checking, go to the next process.

Detach Transmission Cooler Lines from the Side of Transmission

Now, take out the transmission cooler lines by using the wrench. When doing this, you want to remove the cooler lines from the side of the transmission.

In this process, use the edge of the wrench over the cooler line and then twist it down in the counterclockwise position so that it could detach quickly.

Make sure you have detached all the nuts that are attached to the end of cooler lines too. Then, pull out the cooler lines from the transmission to remove it. After that, run to the next step.

Remove the Transmission Cooler Line from the Bottom of the Radiator

Then, detach the other transmission cooler lines that are located in the bottom of the radiator. To remove it, use the wrench over the cooler lines and unplug them by rotating them to the left direction. And then, take out transmission cooler lines away from your vehicle.

Wrap Up

Due to the tight confines of the engine compartment, removing the transmission lines will be more difficult than anything else. However, if you don’t end up doing anything problematic out of the right method on how to remove transmission cooler lines from radiator ford, things will stay on safer side.

So, it’s very important that you maintain all necessary safety requirements before proceeding into the steps. Also, you want to be completely sure about the whole process. Don’t try removing the transmission cooler lines if you are still confused about certain parts.

It will be best to get professional help if the case becomes severe.